hit2424

Hey tankers!
Here is the tank found on our website here: http://www.taigentanks.com/airsoft/20...

How to remove the Tiger 1 road wheels! This process is the same for both the plastic and metal version Tiger 1 tanks.

Hey tankers,
Today we will do a quick airsoft swap. This video is for those who have issues with firing, but still hear the motor spinning in the firing units. 95%+ of the time the swap can be performed without soldering in a new motor. Only if you apply DC current to the motor direct and nothing happens do you have to solder the new motor in. Otherwise you can just swap the plastic casing around the motor. Without me blabbing away it should only take around 5-10 minutes to do.

Hello tankers,
Here is a video on how to adjust your contact switch in our Taigen airsoft tanks. The contact switch is used by the airsoft unit to send a signal to the motherboard to trigger a track recoil and cannon sound. Sometimes it can get stuck either two close together or too far apart. If they are too close then you will get a rapid firing and recoiling action on your tank non-stop. If it is too far apart you will get no or intermittent recoil when you fire. It is very easy to adjust them, you only have to open the top hull and look at the bottom of the airsoft unit. Check the video for more clear instructions and tips.

Visit our website at www.taigentanks.com or our facebook at www.facebook.com/taigen.tanks

Hey Tankers!
The long awaited teardown and rebuilt of the airsoft recoil turret is now here! In this video I will disassemble and reassemble the turret in less than 15 minutes all while explaining how it works at the same time!
Repairs or modifications to the system should be very simple and straight forward. If you do plan on adding a drop of superglue on the sleeve to hold the servo wire in place please do so while the sleeve is not connected to the barrel so you don't glue them together :)