hit2424

Hello tankers,
This video goes through the process of changing your gearboxes on your Tiger 1 tank and some tips I have acquired on the way. Even though this is a Tiger 1 tank, once the upper hull and tracks are off the process is the same for all of the tanks.
Start by removing the tracks, we have another video here on that: http://youtu.be/fXHCUuf3SJ8?list=PLu3...
Then remove the hub cap (if applicable).
Next unscrew the 2.5/3.0mm hex screw from the drive wheel.
At this point you should be able to remove the drive wheel off of the gearbox shaft. If you cannot, please follow my tip in the video on how to remove the drive wheel safely without causing harm or damage.
Next unscrew your gear boxes from the lower chassis.
You can now remove the gearboxes from the tank.

Hey tankers!
Here is the plastic Taigen Tiger 1 early version located here: http://www.taigentanks.com/airsoft/20...

Hey Tankers,
Here is the product TAG120628, it is the infrared 360 kit with machine gun option. This mod is almost plug and play, you will need to solder two wires as instructed. You can find the item for purchase here: http://www.imex-model.com/product/TAG...

Hey tankers,
Today we will do a quick airsoft swap. This video is for those who have issues with firing, but still hear the motor spinning in the firing units. 95%+ of the time the swap can be performed without soldering in a new motor. Only if you apply DC current to the motor direct and nothing happens do you have to solder the new motor in. Otherwise you can just swap the plastic casing around the motor. Without me blabbing away it should only take around 5-10 minutes to do.

Hello tankers,
Here is a video on how to adjust your contact switch in our Taigen airsoft tanks. The contact switch is used by the airsoft unit to send a signal to the motherboard to trigger a track recoil and cannon sound. Sometimes it can get stuck either two close together or too far apart. If they are too close then you will get a rapid firing and recoiling action on your tank non-stop. If it is too far apart you will get no or intermittent recoil when you fire. It is very easy to adjust them, you only have to open the top hull and look at the bottom of the airsoft unit. Check the video for more clear instructions and tips.

Visit our website at www.taigentanks.com or our facebook at www.facebook.com/taigen.tanks

Hello tankers,
Today we shall talk about the Taigen Tanks motherboard. This video will explain all the ports on the tank and what they do!

Hello tankers,
This is a quick unboxing of the Taigen Tiger 1 tank, TAG12022. This is an airsoft 1/16th scale tank with a metal chassis, but plastic drive components. It is a great starter tank to build upon as it does have the metal chassis of the metal version tanks. In fact, the plastic Tigers are my preferred choice for inside activities. They are light and very quick! This tank comes with 3:1 zinc alloy gearboxes, 2000mAh battery and charger, and is RTR right out of the box!