hit2424

Hello tankers,
This video goes through the process of changing your gearboxes on your Tiger 1 tank and some tips I have acquired on the way. Even though this is a Tiger 1 tank, once the upper hull and tracks are off the process is the same for all of the tanks.
Start by removing the tracks, we have another video here on that: http://youtu.be/fXHCUuf3SJ8?list=PLu3...
Then remove the hub cap (if applicable).
Next unscrew the 2.5/3.0mm hex screw from the drive wheel.
At this point you should be able to remove the drive wheel off of the gearbox shaft. If you cannot, please follow my tip in the video on how to remove the drive wheel safely without causing harm or damage.
Next unscrew your gear boxes from the lower chassis.
You can now remove the gearboxes from the tank.

Hey tankers,
So as some of you may know we have been working improving our smoke units for our tanks. I wanted to share one of the first ones to come back with some improved materials and quality. This is in the same form factor as the previous models so everything is backwards compatible.

******Please note this is NOT available at this time. This is just a preview video for you guys to see we are working on it. In fact, there is still something special to add to these guys we haven't talked about yet!*****

Here is the Sturmgeschutz III (aka the Stug 3) plastic version with the new paint job from Taigen tanks! The item can be located on our website here: http://www.taigentanks.com/new-blog/2...

Hello tankers,
Here is a video on how to adjust your contact switch in our Taigen airsoft tanks. The contact switch is used by the airsoft unit to send a signal to the motherboard to trigger a track recoil and cannon sound. Sometimes it can get stuck either two close together or too far apart. If they are too close then you will get a rapid firing and recoiling action on your tank non-stop. If it is too far apart you will get no or intermittent recoil when you fire. It is very easy to adjust them, you only have to open the top hull and look at the bottom of the airsoft unit. Check the video for more clear instructions and tips.

Visit our website at www.taigentanks.com or our facebook at www.facebook.com/taigen.tanks

Hello tankers,
Today we shall talk about the Taigen Tanks motherboard. This video will explain all the ports on the tank and what they do!

Hey fellow tankers,
Today we finally get in depth with the T34/85 from Taigen Tanks. I will go over in detail the tank exterior as well as the interior and drive components. The T34 is set to be released in a few weeks and I wanted to make sure everyone got a detailed video beforehand :) The T34 will come with these features:
metal lower chassis
metal suspension arms
metal drive wheels
metal road wheels with rubber tires and bearings
metal adjustable idler wheels with bearings
360 degree unlimited turret rotation
metal turret
steel 4:1 ratio gearboxes (newly developed just for the T34!)
airsoft or infrared versions
metal swiveling backplate for easy access to drive wheels
easy open top hull (switch on bottom)
all controls (power switch, smoke unit, volume, charge) on outside
and much more!